Browse Categories

Resources & buying Guides

Top 10 Air Purifiers

Air Purifier Reviews

Browse by Manufacturer
Mailing Lists
Trustpilot Badge

Dyson DC07, DC14 Brush Bar


Dyson DC07, 14 Brush Bar
In Stock : $31.37
ratingratingratingratingrating

Details:
Dyson DC07 replacement brushroll assembly for all DC07 & DC14 vacuum models.




The genuine Dyson replacement brush bar number 904174-01 is designed to fit the Dyson DC07 and the Dyson DC14 vacuum series. This Dyson 904174-01 brush bar is one of the hardest working parts in your vacuum cleaner because it comes in constant contact with the floor and is responsible for helping pick up all of the debris taken into your DC07 and DC14.

All brush bars are susceptible to being tangled on long fibrous materials, such as hair, so regular maintenance is essential for prolonging the life of your Dyson DC07 brush bar. Eventually, even the most well made Dyson DC07 brush bar requires replacement. When that time comes, look to Vacuum-Direct.com for your genuine Dyson DC07 and DC14 Replacement Brush Bar needs.

Vacuum-Direct.com sells genuine Dyson replacement parts. The genuine Dyson replacement brush bar is an original manufacturers part, meaning it is manufactured to full original factory specification. By using genuine Dyson replacement parts, your new brush roll will be of the same superior quality as the rest of the parts in your DC07 and DC14.

To perform maintenance on your DC07 and Dyson DC14 brush bar or to replace it, follow these steps:

  • Unplug your vacuum and turn the clutch actuator to bare floors.
  • Remove the soleplate from your vacuum by loosening the three soleplate fasteners.
  • Clear the brush bar of any obstructions and proceed with swapping the old brush bar out for the new genuine Dyson replacement brushbar.
  • Pull the brushbar away from the cleaner head. Using a large flathead screwdriver, pry the brushbar belt away from the brushbar. This will allow you to remove the brushbar from the belt (you may need to rotate the brushbar when pulling it out). Depending on how new the clutch assembly is, the brushbar belt could be very tight fitting.
  • Reverse the process to install the new genuine Dyson brush bar.
  • Once the brushbar belt is in place the brushbar should rotate freely, if not check to make sure the belt did not twist. If the belt is left twisted, it could damage the clutch assembly.
  • Now you are ready to replace the soleplate and tighten the fasteners. Be sure that your soleplate is securely fitted to the bottom of the cleanerhead by aligning the soleplate with the front edge of the cleanerhead.

    Using genuine Dyson replacement parts will allow you to maintain the remaining warranty on your DC07 and DC14. Generic parts will void any warranty you have left, and they could put your machine at risk. Dont chance it. Protect your investment by using genuine Dyson replacement parts for all of your maintenance needs, including DC07 and DC14 brush bar replacement. Generic brush bars may not be the same perfect fit as a genuine Dyson replacement brush bar, causing it to rattle or stress your machine. Using generic belts with your genuine Dyson brush bar may also cause problems. Generic belts that are too long could wobble, damaging the parts nearby, and using a generic belt that is too short might break your genuine Dyson brush bar. Dont apply a quick fix with generic parts that will only cost you more time and money down the road; no, use only genuine Dyson replacement parts.

    The genuine DC07 and DC14 brush bar number 904174-01 is available from Vacuum-Direct.com and services all models in the DC07 and the DC14 line.

    Models in the DC07 line include: All Floors, Carpet, Target, HSN Exclusive, Purple Scarlet HSN Exclusive, Original, Pink Low Reach, Animal, Full Gear, and Full Kit.

    Models in the DC14 line include: All Floors, Animal, Drive, Low Reach, Total Clean, Full Kit, Full Gear, Full Access, Complete, Mail Order Exclusive, Online Retailer Exclusive, and Plus.

    Manufacturer: Dyson

    MPN: 904174-01, DY-904174-01, DY-90417401

    How to Clean the Dyson DC07 Brush Bar :

    (Click Image for PDF version)

  • Manufacturer: Dyson Parts
    Manufacturer Part No: 904174-01
    Dyson Part Fits: Dyson DC07, Dyson DC14



    Related Products

    Dyson Power Switch
    In Stock: $4.45
    ratingratingratingratingrating
    Dyson Power Switch

    Product Reviews

    Rate This Product:
    or Create a Review
    (101 Ratings, 0 Reviews) Average Rating:
    ratingratingratingratingrating